Oil and Gas, Petroleum Engineering Project Materials

Below are Oil and Gas, petroleum Engineering Project Topics with available Chapters 1-5. Click on any to preview its Contents

  1. DEREGULATION OF THE DOWNSTREAM OIL SECTOR IN NIGERIA AS A PANACEA TO ECONOMIC RECOVERY OF THE COUNTRY: (AN ANALYSIS OF 2010-2015 ECONOMIC PROGRAMME OF NIGERIA)
  2. THE IMPACT OF CRUDE OIL PRODUCTION ON ECONOMIC GROWTH IN NIGERIA
  3. INVESTIGATION INTO PIPELINE VANDALISM IN NIGER DELTA(NIGERIA) (A Case Study Of Abiteye in Warri South West, Delta State )
  4. IDENTIFICATION OF WELL PROBLEMS USING WELL TESTING (A CASE STUDY OF UMU-N2 WELL OF MIDWESTERN OIL AND GAS COMPANY, KWALE, NIGERIA)
  5. TREATMENT OF PRODUCED WATER TO MEET IRRIGATION STANDARD
  6. UTILIZATION OF NODAL ANALYSIS TECHNIQUE FOR SELECTING THE OPTIMUM TUBING SIZE TO ACHIEVE AN OPTIMUM PRODUCTION RATE IN NATURALLY FLOWING WELL VIA MODELLING
  7. THE EFFECTS OF CONTAMINANTS ON THE FLOW OR RHEOLOGICAL PROPERTIES OF OIL BASED MUD
  8. ESTIMATION OF COEFFICIENT OF ISOTHERMAL OIL COMPRESSIBILITY FOR UNDERSATURATED RESERVOIR BY CUBIC EQUATION OF STATE
  9. SIMULATION OF GAS DEHYDRATION ON AN FPSO USING ASPEN HYSYS
  10. ASSESSMENT OF SAFE AND COST EFFECTIVE METHODS TO MAXIMIZE PRODUCTION (PROFITABILITY) FROM A GAS-LIFTED FIELD
  11. EFFECTS OF PETROLEUM LEVEL (WASTE OIL) ON SOIL FERTILITY IN THE VICINITY OF A MECHANIC WORKSHOP
  12. MATHEMATICAL MODEL FOR LIQUID LOADING IN NATURAL GAS WELL PRODUCTION
  13. ANALYTICAL STUDY OF A SMALL SCALE BIOMASS GASIFIER
  14. PREDICTION OF THE DEW-POINT PRESSURE OF A GAS CONDENSATE RESERVOIR
  15. DETERMINATION OF THE FLOWING BOTTOM-HOLE PRESSURE OF A VERTICAL WELL FROM SURFACE PRESSURE AND WELL PARAMETERS
  16. THE SUITABILITY OF EGG SHELL AND SNAIL SHELL WASTE AS LOCAL MATERIALS IN IMPROVING THE PH OF MUD
  17. A STUDY OF THE NIGERIAN PETROLEUM RETAIL MARKET
  18. PREDICTION OF THE DEW-POINT PRESSURE OF A GAS CONDENSATE RESERVOIR
  19. EMPIRICAL CORRELATION OF OIL EFFECTIVE PERMEABILITY AS A FUNCTION OF PRESSURE
  20. PUMP CAPACITY DETERMINATION FOR TWO-PHASE VERTICAL FLUID FLOW
  21. IMPROVED MODEL FOR PREDICTION AND REMEDIATION OF FORMATION DAMAGE IN OIL WELLS
  22. THE SUBSURFACE MAPS AND THEIR APPLICATIONS IN THE OIL INDUSTRY
  23. RESERVOIR SIMULATION USING MBAL (A CASE STUDY OF RZD FIELD
  24. GAS DEHYDRATION USING TRIETHYLENE GLYCOL (A CASE STUDY OF SHELL, UGHELI)
  25. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED LIQUIFIED PETROLEUM GAS LEAKAGE DETECTOR USING GSM MODULE
  26. LOCAL CONTENT IN THE OIL AND GAS INDUSTRY OF NIGERIA: CHALLENGES, PROSPECTS AND THE WAY FORWARD
  27. COMPARATIVE STUDY BETWEEN OVERBALANCED AND UNDERBALANCED OIL DRILLING METHODS
  28. DESIGN OF AN ARTIFICIAL LIFT SYSTEM FOR OPTIMIZATION PRODUCTION FOR WELL J-50
  29. AN ASSESSMENT OF GRAVEL PACKING METHODS USED IN THE PETROLEUM INDUSTRY
  30. DETERMINATION OF FLOWING BOTTOM-HOLE PRESSURE FROM WELL-HEAD DATA
  31. DRILLING FLUID ADDITIVE; AN OVERVIEW, HISTORY OF LOCAL CONTENT DRILLING FLUID ADDITIVE CONSIDERING GUM ARABIC
  32. APPLICATION OF INTELLIGENT WELL COMPLETION IN OPTIMIZING PRODUCTION FROM OIL RIM RESERVOIRS
  33. GAS LIFT OPTIMIZATION OF OIL PRODUCING WELLS USING PROSPER NODAL ANALYSIS
  34. DEVELOPMENT OF NODAL ANALYSIS FOR PRODUCTION OPTIMIZATION- A SOFTWARE ASSISTED APPROACH
  35. ASSESSING THE SPATIAL DISTRIBUTION AND LOCATIONAL IMPACT OF PETROL SERVICE STATIONS ON UVWIE LGA DELTA