Mechanical Engineering Project Materials

Below are Mechanical Engineering Project Topics with available Chapters 1-5. Click on any to preview its Contents

  1. THE DESIGN AND CONSTRUCTION OF BURGLARY PROOF
  2. FABRICATION OF METAL PANEL DOOR
  3. DESIGN AND FABRICATION OF A HYDROPNEUMATIC PRESSURE BOOSTER TANK SYSTEM OF 1800 LITRES CAPACITY
  4. DESIGN AND FABRICATION OF A SIMPLE LOW COST WASHING MACHINE SUITABLE FOR WASHING POLYETHYLENE MATERIALS
  5. DESIGN AND CONSTRUCTION OF A SUBMARINE HULL
  6. DESIGN AND FABRICATION OF A COST EFFECTIVE PLASTIC EXTRUDING MACHINE
  7. DESIGN AND FABRICATION OF A MEDIUM SIZED HOUSEHOLD BIOGAS PLANT
  8. EVALUATION OF MAINTENANACE MANAGEMENT SYSTEM IN TOTAL EXPLORATION & RODUCTION NIGERIA LIMITED, OBAGI BASE, OML58, RIVERS STATE, NIGERIA
  9. DESIGN, FABRICATION AND TESTING OF A SCREW PRESS BRIQUETTING MACHINE
  10. ERGONNOMIC ASSESSMENT OF KOROPE MINI BUSES
  11. DESIGN AND CONSTRUCTION OF A SOLAR WATER HEATER FOR DOMESTIC USE
  12. DESIGN AND CONSTRUCTION OF FUELLESS GENERATOR
  13. DESIGN AND CONSTRUCTION OF DUAL–POWERED HEAT TREATMENT FURNACE
  14. Transient heat conduction in a solidifying alloy
  15. DESIGN AND INSTALLATION OF CATHODIC PROTECTION SYSTEM USING ZINC ANODE
  16. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING
  17. THE DESIGN AND FABRICATION OF MECHANICAL LAWN MOWER
  18. REPAIR OF AN AIRCONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
  19. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
  20. FABRICATION OF METAL SHELF
  21. CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
  22. DESIGN AND FABRICATION OF A METAL BOOKSHELF
  23. DESIGN A ND FABRICATION OF A DUST EXTRACTOR
  24. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
  25. THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHEET
  26. DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
  27. DESIGN AND CONSTRUCTION OF A SPIN DRYER
  28. REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION
  29. DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE
  30. REPAIR OF A DAMAGED REFRIGERATOR
  31. THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
  32. REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
  33. DESIGN AND CONSTRUCTION OF BAKING OVEN
  34. THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
  35. CONSTRUCTION OF TWO FACE GAS BURNER
  36. FABRICATION OF A FOLDABLE CAMP BED
  37. DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF
  38. CONSTRUCTION OF A STANDARD BANKING OVEN WITH DUAL POWER SOURCE (ELECTRIC/GAS)
  39. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
  40. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE